background image

OPERATION

Battery Pack and Desktop Charger

Your microTALK

®

radio includes a rechargeable NiMH battery pack (part

No. FA-BP) and a rapid desktop charger (part No. PA-CX). 
Your rapid desktop charger is capable of recharging one (1) radio (with
battery pack installed in battery compartment) or one (1) battery pack
using the included battery pack guide in the radio charging well. See “Optional
Accessories” to order additional rechargeable NiMH battery packs (part No. FA-BP) or other
speaker/microphone accessories.
You should fully charge the included rechargeable NiMH battery pack (part No. FA-BP)
before using your microTALK

®

radio for the first time. 

To Recharge the Rechargeable NiMH Battery Pack In Radio:

1. Attach the POWER SUPPLY to the charger base and plug it in to an

electrical socket.  

2. Place the rechargeable NiMH BATTERY PACK (part No. FA-BP) in the

battery compartment (see “Battery Installation”).

3. Place the RADIO in the charger base. 
The CHARGE light on the charger base will indicate when the radio is
inserted into the charger properly.
A full charge will take approximately three (3) hours. You can leave the unit in the charger
indefinitely. 

NOTE: Your microTALK

®

radio can also be operated with four standard AAA alkaline

batteries.

WARNING: Only the NiMH battery pack FA-BP can be recharged.

To Recharge the Rechargeable NiMH Battery Pack:

1. Attach the POWER SUPPLY to the charger base and plug it into an

electrical socket. 

2. Insert BATTERY PACK GUIDE in the radio charging well.

English

3. Place the rechargeable NiMH BATTERY PACK (part No. FA-BP) in the

charger base.

The CHARGE light on the charger base will indicate when the rechargeable NiMH battery
pack (part No. FA-BP) is inserted into the charger properly.
A full charge will take approximately three (3) hours. You can leave the the battery pack
in the charger indefinitely. 

NOTE: Your microTALK

®

radio can also be operated with four standard AAA alkaline

batteries.

WARNING: Only the NiMH battery pack FA-BP can be recharged.

Radio Power

To Turn Your Radio On:

1. Rotate the ON-OFF/VOLUME knob clockwise. An audible tone will

indicate that the radio is On.

Your microTALK

®

radio is now in LISTENING MODE, ready to receive

transmissions. The radio is always in LISTENING MODE, except when
the TALK, CALL or MODE buttons are pressed.

To Turn Your Radio Off:

1. Rotate the ON-OFF/VOLUME knob anticlockwise until you hear and feel a click.

Battery Low Indicator

Battery power is indicated by the segments appearing at the bottom of
the display. As battery power decreases, fewer segments will be visible.
When the last segment begins to flash, the batteries should be
replaced or recharged.

WARNING: Only the NiMH battery pack FA-BP can be recharged.

On-Off/Volume
Knob

Battery Low

CHARGE

Battery Pack & 
Desktop Charger

CHARGE

Battery Pack 
In Radio

CHARGE

Battery Pack Only

 

Summary of Contents for microTALK MT 925 PRO

















Reviews: