OPERATION
Battery/Power Saver
If there are no transmissions within ten (10) seconds, the unit will
automatically switch to Battery Save Mode and POWER SAVER will
appear on the display. This will not affect the unit’s ability to receive
incoming transmissions.
Power/Transmit-Receive Indicators
The POWER/TRANSMIT-RECEIVE INDICATOR flashes every three (3)
seconds to indicate that the radio is On.
While transmitting, the POWER/TRANSMIT-RECEIVE INDICATOR will
stay on steady and the rings of the
TRANSMIT/RECEIVE ICON will be displayed.
While receiving a transmission, the
POWER/TRANSMIT-RECEIVE INDICATOR will flash
rapidly and the lightning bolts of the
TRANSMIT/RECEIVE ICON will be displayed.
Communicating with Another Person
To Talk To Another Person:
1. Press and hold the TALK button.
2. With the microphone about 5 cm (2 inches)
from your mouth, speak in a normal voice.
3. Release the TALK button when you have finished
talking and listen for a response.
You cannot receive incoming calls while pressing the TALK button.
English
Listening for a Response
When You Have Finished Talking:
1. Release the TALK button to receive incoming transmissions.
Your microTALK
®
is always in LISTENING MODE except when the TALK,
CALL or MODE buttons are pressed.
Volume
To Adjust the Volume:
1. Rotate the ON-OFF/VOLUME knob.
Call Button
To Alert Another Person That You Are Calling:
1. Press and release the CALL button.
The other person will hear a two (2) second ringing tone. You cannot
receive transmissions while sending a call.
NOTE: Both radios must be tuned to the same channel/privacy code or
channel/DCS code to communicate.
Channels
To Select a Channel:
1. With the radio On, push the CHANNEL UP or CHANNEL DOWN
button. You can press and hold the CHANNEL UP or CHANNEL DOWN
button for fast advance.
NOTE: Both radios must be tuned to the same channel/privacy code
(see “CTCSS Privacy Codes”) or channel/DCS code (see “DCS
Codes”) to communicate.
Channel Number
Channel Buttons
Talk Button
5 cm (2 inches)
From Mouth
On-Off/Volume
Knob
Listening
Call Button
Power/Transmit-
Receive Indicator
Transmiting
Receiving
Power Saver Icon
