background image

MODE FUNCTIONS

"Roger Beep" Confirmation Tone

Your listener will hear an audible tone when you release the TALK
button. This alerts the other party that you have finished talking and
that it is OK for them to speak. This feature can be turned On or Off.

To Turn “Roger Beep” On or Off:

When you turn On your microTALK

®

radio for the first time, “Roger

Beep” will be On.
1. Press and release the MODE button until the “Roger Beep” icon

flashes on the display. The current On or Off setting is displayed.

2. Press the CHANNEL UP or CHANNEL DOWN button to select “Roger

Beep” On or Off.

3. When your desired Roger Beep Mode setting is displayed, choose

one of the following:
a. Press the MODE button to enter the setting and proceed to other

functions.

b. Press the ENTER button to enter the setting and return to

LISTENING MODE. 

c. Do not press any buttons for fifteen (15) seconds to enter the

setting and return to LISTENING MODE.

The setting you select will be saved when you turn your radio Off and On again. When the
“Roger Beep” is On, the “Roger Beep” icon will be displayed.

Keystroke Tones

With Keystroke Tones turned On, your radio will sound beeps each time
you press a button or change a setting. This feature can be turned On
or Off.

English

To Turn Keystroke Tones On or Off:

When you turn On your microTALK

®

radio for the first time, Keystroke

Tones will be On.
1. Press the MODE button until the Keystroke Tones icon flashes on the

display. The current On or Off setting is displayed.

2. Press the CHANNEL UP or CHANNEL DOWN button to turn Keystroke

Tones On or Off.

3. When your desired Keystroke Tone Mode setting is displayed,

choose one of the following:
a. Press the MODE button to enter the setting and return to

LISTENING MODE.

b. Press the ENTER button to enter the setting and return to

LISTENING MODE. 

c. Do not press any buttons for fifteen (15) seconds to enter the

setting and return to LISTENING MODE.

The setting you select will be saved when you turn your radio Off and On again. When
Keystroke Tones are On, the keystroke tone icon will be displayed.

Channel Buttons

Mode Button

Select On/Off

Keystroke Icon

Select On/Off 

Channel Buttons

Mode Button

Roger Beep Icon

Summary of Contents for microTALK MT 925 PRO

















Reviews: