![background image](http://html1.mh-extra.com/html/cobra/microtalk-mt-925-pro/microtalk-mt-925-pro_manual_2631198013.webp)
MODE FUNCTIONS
Dual Watch
Dual watch allows you to simultaneously monitor any two (2) Dual
Watch Locations.
Dual Watch Location 1 – is always the channel/privacy code or
channel/DCS code displayed before you entered Mode
Functions. See “CTCSS Privacy Codes” and “DCS Codes” sections for further
details.
Dual Watch Location 2 – will be stored in the radio. It can be edited and/or recalled for
future engagements of Dual Watch Mode.
To Program Or Edit Dual Watch Location 2 And
Engage Dual Watch Mode:
1. Press the MODE button until the Dual Watch icon and the channel
number flash on the display.
2. Choose one of the following:
a. Select or edit a channel/privacy code:
1) Press the CHANNEL UP or CHANNEL DOWN button to select a
channel (1 to 8).
2) Press the MODE button to set the channel. The CTCSS icon and
current setting (the small numbers next to the channel number
or Off) will flash on the display.
3) Press the CHANNEL UP or CHANNEL DOWN button to select a
CTCSS privacy code (00 to 38).
b. Select or edit a channel/DCS code:
1) Press the CHANNEL UP or CHANNEL DOWN button to select a
channel (1 to 8).
2) Press the MODE button to set the channel. The CTCSS icon and
current setting (the small numbers next to the channel number
English
or Off) will flash on the display.
3) Press the MODE button again. The DCS icon and current
setting (the small numbers next to the channel number or Off)
will flash on the display.
4) Press the CHANNEL UP or CHANNEL DOWN button to select a
DCS code (00 to 83).
3. Press the ENTER button to set Dual Watch Location 2 and engage DUAL WATCH MODE
(see below for further details).
NOTES: To terminate Dual Watch and proceed to the next available Mode Function, press
the MODE button.
While setting Dual Watch Location 2, if you do not press any buttons for fifteen
(15) seconds your radio will automatically return to LISTENING MODE on Dual
Watch Location 1.
To Turn Dual Watch On:
NOTE: Dual Watch Location 2 must be programmed to turn Dual Watch
on.
1. Select the first channel/privacy code or channel/DCS Code you wish
to monitor (see “CTCSS Privacy Codes” and “DCS Codes” for further
details).
2. Press the MODE button until the Dual Watch icon and the channel
number flash on the display.
NOTE: While setting Dual Watch, if you do not press any buttons for
fifteen (15) seconds your radio will automatically return to
LISTENING MODE on the channel/privacy code or channel/DCS
code displayed before you entered Mode Functions.
3. Press the ENTER button to engage DUAL WATCH MODE.
Mode Button
Enter Button
Select Channel
Channel Buttons
Mode Button
Select Channel
Select Privacy Code
Select DCS Code
Dual Watch Icon