![background image](http://html1.mh-extra.com/html/cobra/cx50-jr-2015/cx50-jr-2015_owners-manual_2630602068.webp)
Effective length of the shoulder on the clutch arbor bolt (see Figure C1). Nominal
is 16.00mm (0.630”). As this decreases, the spring stack needs to decrease
equally. This can change due to the shoulder bolt ‘setting’ into the arbor (see C2)
Figure C1
If your effective shoulder length is off, or your shoes are worn, adjust the height
of your overall combined spring stack accordingly (i.e. if your effective shoulder
length is 0.5mm short of the 16.00 measurement, decrease the overall combined
spring stack height by 0.5mm, or if your shoes are worn by 0.5 mm, increase the
overall combined spring stack height by 0.5mm).
Frequently asked questions
Q: When should the springs be replaced?
A: When the clutch ‘hit’ occurs too early or too late.
Q: Should the clutch springs be replaced if the shoes wiggle on the arbor?
A: Not if the clutch is ‘hitting’ correctly. Don’t mess with it
Q: What is the acceptable tolerance on any of the measurements
A: For the most part that does not matter. Suffice it to say that any efforts
to make the three shoes behave identically will make the best performing
clutch. Taking extra time to balance the three stacks (shims, springs,
bolts, etcX) to as close to the
into will result in a better performing motorcycle.
Q: One of my two riders weighs 85 pounds and the other weighs 45 pounds.
Should I have their clutches adjusted differently because of their weight?
A: No, there is one best setting and it works for light or heavy riders.
Q: If my clutch basket changes color, should I replace it?
A: If it is blue or purple, replace it. If it is silver or brown, you are fine.
Cobra is now going to greater lengths to ensure that
motorcycle is performing the best possible from the shop and so it may have a
different clutch stack or shim washer from what you are used to. Please take
measurements for knowledge sake but don’t blindly restack washers to different
heights without first consulting the factory.
68
Effective length of the shoulder on the clutch arbor bolt (see Figure C1). Nominal
”). As this decreases, the spring stack needs to decrease
equally. This can change due to the shoulder bolt ‘setting’ into the arbor (see C2)
Figure C2
If your effective shoulder length is off, or your shoes are worn, adjust the height
of your overall combined spring stack accordingly (i.e. if your effective shoulder
of the 16.00 measurement, decrease the overall combined
spring stack height by 0.5mm, or if your shoes are worn by 0.5 mm, increase the
overall combined spring stack height by 0.5mm).
Frequently asked questions
Q: When should the springs be replaced?
When the clutch ‘hit’ occurs too early or too late.
Q: Should the clutch springs be replaced if the shoes wiggle on the arbor?
A: Not if the clutch is ‘hitting’ correctly. Don’t mess with it
Q: What is the acceptable tolerance on any of the measurements?
A: For the most part that does not matter. Suffice it to say that any efforts
to make the three shoes behave identically will make the best performing
clutch. Taking extra time to balance the three stacks (shims, springs,
bolts, etcX) to as close to the same length as you are willing to put effort
into will result in a better performing motorcycle.
Q: One of my two riders weighs 85 pounds and the other weighs 45 pounds.
Should I have their clutches adjusted differently because of their weight?
re is one best setting and it works for light or heavy riders.
Q: If my clutch basket changes color, should I replace it?
A: If it is blue or purple, replace it. If it is silver or brown, you are fine.
Cobra is now going to greater lengths to ensure that the clutch on your
motorcycle is performing the best possible from the shop and so it may have a
different clutch stack or shim washer from what you are used to. Please take
measurements for knowledge sake but don’t blindly restack washers to different
ights without first consulting the factory.
Effective length of the shoulder on the clutch arbor bolt (see Figure C1). Nominal
”). As this decreases, the spring stack needs to decrease
equally. This can change due to the shoulder bolt ‘setting’ into the arbor (see C2)
If your effective shoulder length is off, or your shoes are worn, adjust the height
of your overall combined spring stack accordingly (i.e. if your effective shoulder
of the 16.00 measurement, decrease the overall combined
spring stack height by 0.5mm, or if your shoes are worn by 0.5 mm, increase the
Q: Should the clutch springs be replaced if the shoes wiggle on the arbor?
A: For the most part that does not matter. Suffice it to say that any efforts
to make the three shoes behave identically will make the best performing
clutch. Taking extra time to balance the three stacks (shims, springs,
same length as you are willing to put effort
Q: One of my two riders weighs 85 pounds and the other weighs 45 pounds.
Should I have their clutches adjusted differently because of their weight?
re is one best setting and it works for light or heavy riders.
A: If it is blue or purple, replace it. If it is silver or brown, you are fine.
the clutch on your
motorcycle is performing the best possible from the shop and so it may have a
different clutch stack or shim washer from what you are used to. Please take
measurements for knowledge sake but don’t blindly restack washers to different