![background image](http://html1.mh-extra.com/html/cobra/cx50-jr-2015/cx50-jr-2015_owners-manual_2630602010.webp)
10
Replacing Transmission / Clutch Lubricant
Tools needed:
•
5mm allen wrench
•
Minimum of 235 ml (8 oz)
Cobra Venom 3 Shoe Clutch Milk
(Part
#MCMUGF32).
Procedure:
1. Begin this procedure with a bike that has been ridden more than 5 minutes
but less than 10 minutes. It is desired to have the engine warm enough so
that the oil is ‘runny’ but not so hot that there is risk of being burned by the
engine or the oil.
Hot oil and hot components on the motorcycle may cause burns.
2. Remove the oil drain plug, on the clutch cover, near the brake lever (figure 1).
Figure 1
3. Allow the oil to drain completely, then reinstall the oil drain plug.
4. Remove the oil fill plug and add 8.0oz of
Cobra Venom 3 Shoe Clutch Milk
thru the oil fill plug.
NOTE:
Putting additional oil, up to 350 ml (12 oz), can help clutch life. More than
350 ml (12 oz) will degrade engine performance.
NOTE:
It can be helpful to lean the bike over on its left side to add oil to the bike.
5. Reinstall the oil fill plug.
NOTE:
Cobra has spent considerable time and money developing the proper
lubrication to handle the harsh environment of the automatic clutch and
transmission of this motorcycle. Cobra’s specially developed
Cobra Venom 3
Shoe Clutch Milk
(Part # MCMUGF32) was formulated to provide superior
lubrication and cooling capability over extended periods of time and is the
recommended lubricant for your Cobra motorcycle.