2
Network Controller Card DashBoard Status and Settings Interfaces
2-24
HPF-9000 PRODUCT MANUAL
HPF9000-OM (V1.8)
Figure 2-9 Frame Status DashBoard Display
Product Display
This displays shows the hardware identifcation of the network card, as well as software
revision. It also shows current draw of the network card itself, as well as card rear
temperature (adjacent to card controller chips).
•
•
•
Network Display
This displays shows the current network settings (either user configured
static or DHCP assigned status).
•
•
•
Access Mode shows Open or Locked (which requires a password for
access). See Setting Network Controller Card/Frame User Access (p.
2-22) for setting frame DIP switch for open or locked access.
Active Connections shows how many DashBoard instances are currently
accessing the frame.
Active Cards shows how many cards (user slots 1 thru 20) are currently
installed and recognized by the frame.
Cobalt Support Network Status shows whether or not the Cobalt Support
VPN connection to the frame is enabled.
Hardware Display
This displays shows the current overall status of the frame hardware and its power
supplies.
Audible Alarm shows user setting of alarm mute jumper. See Setting Network
Controller Card to Mute Audible Alarms (p. 2-23) for more information.
Frame Model - S/N shows frame model number and S/N. (If network card is
installed in a frame other than HPF-9000, “unknown” will be displayed.)
Frame Voltage/Power shows frame rail voltages and positivce rail total power
consumed.
Power Supplies Status shows PSU presence for each of two PSU slots, as well
as status and current for each PSU. (If either of two PSUs are not installed,
“missing” is displayed.)
Fan Door Status shows if fan door is open or closed, and shows fan speed
setting and temperature at door air inlet when door is closed. See Frame Setup
and Auxiliary Function Control Tabs (p. 2-25) for setting fan speed.
