2
Setting Up Network Remote Control
2-22
HPF-9000 PRODUCT MANUAL
HPF9000-OM (V1.8)
Setting Network Controller Card/Frame User Access
Via DashBoard, the frame can be set for
Locked
or
Unlocked
password
access using the dialog shown below.
For cases where locked access needs to be overridden, the Network Controller
Card can be set to ignore locked access using the DIP switch as shown below.
12
OFF (0) position
forces user
password access to
be applied
34
Right-click on the frame in DashBoard Basic Tree View and select
Lock/Unlock Access to access password set/enable dialog.
Check Change master password and Prevent unauthorized
access to this frame to enable password-controlled frame
access.
In the drop-down list, select targets that are desired to have
access control applied.
Click OK when done.
ON (1) position sets
frame to ignore locked
access (override) and
allow full access to the
frame
Setting DIP switch position 3 to ON or OFF allows password
override as shown.
OFF
ON
