HPF9000-OM (V1.8)
HPF-9000 PRODUCT MANUAL
2-17
Installation and Setup
Setting Up Network Remote Control
Install and Set Up DashBoard™ (if not present)
1.
If not already performed, install DashBoard™ on the computer
connected to the frame LAN as described in step 2 in Frame Setup
Using DHCP on page 2-12.
2.
Open DashBoard™. Under Window
Preferences... make certain
Automatic discovery of devices Enable button is selected (as shown on
the next page).
Note: It is recommended to identify each frame with its HPF-FC
network card serial number and its assigned IP address. This can be
easily done using the Frame Log Sheet included in the back of this
manual. Refer to Managing Frames Using a Log on page 2-26 for
more information.
Set Network Computer for Static IP Addressing
3.
As shown below, set the frame LAN computer to add static IP addressing
that is on the same network as the network card default static IP address
of
192.168.2.x
.
SETUP_AUTODISC.PNG
