50
Transcoders
The Transcoders Configuration Tab allows the configuration of up to 4 transcoding sessions.
The Statistics tab provides quick feedback on the status of each transcoding session.
Transcoders Configuration Tab
The Transcoder Channels table, shown below, has a summary of the status of each transcoding
session and its more important parameters.
The Status column indicates the overall state of the session at a glance. If it indicates Running,
the transcoding session is operating normally. If it indicates Idle, the transcoding session is not
operating; more detail can be found in the Transcoder Statistics Tab.
Click on the Edit button to configure a specific transcoder session. When the button is clicked,
the transcoder configuration area is displayed. This area is divided into three parts:
•
The Transcoder Configuration section, which contains all the transcoder parameters.
•
The Established Connections section, which lists all current connections to the
transcoder (both inputs and outputs). This section is available in the configuration area
for all BBG-1090-TRX-MPEG input and output ports.
•
The Add Connections Controls, which allows new input and output connections to the
transcoder to be added. This section is available in the configuration area for all BBG-
1090-TRX-MPEG input and output ports.
Transcoder Configuration Parameters
The Transcoder Configuration section is depicted below. It is pre-populated with the current
configuration for the selected transcoder session.
Summary of Contents for BBG-1090-TRX-MPEG
Page 18: ...18...
