26
•
The Add Connection area. This allows for a new connection to be added to this port.
This control is available for all ports, and is described in detail in the Connections
section.
Once the desired configuration is entered, click on the Apply button to have them take effect.
This will cause the changes made in the Configuration Parameters to be implemented, any
connections marked for deletion to be removed, and any new connection entered in the Add
Connection area to be established. Clicking on the Cancel button will discard any changes.
ASI Inputs: Program Info Tab
For ASI Inputs with a valid transport stream containing at least one program, the Program Info
tab shows the contents of the transport stream, as illustrated below:
ASI Input Selection
PMT PID
Transport Stream ID
Element PIDs
The following elements are present:
•
ASI Input: Select which input to display. The selection uses the port names configured
in the previous step.
•
Header Information: The top header indicates the Transport Stream ID (TSID). For
each program, an individual header is provided, showing the Program Number and the
PMT PID.
•
Program Name: If available, the Program Name is displayed. If the transport stream
contains a Service Description Table (SDT), the Service Name is displayed here. If the
transport stream contains a Virtual Channel Table (VCT – used in terrestrial ATSC
broadcasts), this field will show the major and minor channel numbers, and the short
channel name (as depicted above).
•
Elements: For each program, a list of elements is provided. The list contains the
Element PID, the element type (Audio/Video/other), and the type of compression if
appropriate. For audio streams, if a language code is present, it is displayed here as well.
Summary of Contents for BBG-1090-TRX-MPEG
Page 18: ...18...
