23
Network Statistics Tab
The Network Statistics Tab reports the current IP configuration of each Ethernet port, as well as
their link state and running status.
The following parameters are reported in the Network Statistics tab:
•
Alarm on Link Loss: Reports the current setting of this parameter.
•
IP Address: Reports the current IP Address for the port.
•
Subnet Mask: Reports the current Subnet Mask for the port.
•
Default Gateway: Reports the current Default Gateway for the port.
•
IGMP Version: Reports the current setting for this parameter.
•
Interface Speed: Reports the current setting for this parameter.
•
Port 1/2 Link: This indicator has the following states:
o
Link OK: The port has established link with the switch.
o
No Link: The port does not currently have link. If Alarm on Link Loss is set to
Yes, the Dashboard™ Card State will be red and the Status LED in the front of the
board will also be red. If Alarm on Link Loss is set to No, this indicator will still be
red, but the alarm will not propagate.
•
Port 1/2 Status: This indicator is the port overrun status. It has the following states:
o
OK: The port is operating normally.
o
TX Overflow: In the current configuration, the IP outputs are attempting to
transmit more than the port capacity (i.e., the overall output data for this port
exceeds the interface speed of 100 Mb/s or 1 Gb/s). The Dashboard™ Card State
will be red and the Status LED in the front of the board will also be red. In this
case, reduce the output bit rate (either by externally controlling the inputs or by
removing output ports).
If this indicator is red, data is being dropped
.
•
Link Speed (Mb/s): This parameter reports the actual speed negotiated with the switch
for the port. If the port has no link, the value reported here is zero.
•
MAC Address: This reports the MAC address of the Ethernet port.
Summary of Contents for BBG-1090-TRX-MPEG
Page 18: ...18...
