37
The IP Input Ports will automatically detect the use of RTP, in a packet-by-packet basis. The
BBG-1090-TRX-MPEG will only accept RTP version 2 packets satisfying the following
conditions:
•
No header extensions (X=0)
•
No CSRC list (CC=0)
•
Payload type set to MPEG-2 Transport Streams (PT=33)
For more details, please consult RFC 1889, section 5.1. The BBG-1090-TRX-MPEG does not
receive, require, or process RTCP packets.
Established Connections
This section lists output connections currently established to the selected IP input. An example
of the list is displayed below:
Individual connections can be removed the checking the corresponding box in the Remove
column.
The Apply/Cancel Buttons
Once the configuration information is filled in, click on the Apply button to make it active. If
there are no errors, the port will be created, and the configuration area disappears. If any errors
are detected, they will be displayed at the top of the Apply button. The following errors are
flagged:
•
Error: enter a Source Address or select "Any Address"
: you selected Specific Address
for Source but left the Source Address field as 0.0.0.0.
•
Error: X.X.X.X is NOT a multicast address
: you selected multicast reception, and
entered an address that is not multicast. Multicast addresses go from 224.0.0.0 to
239.255.255.255.
•
Error: X.X.X.X is NOT a valid unicast address
: you entered an invalid unicast address.
Valid unicast addresses go from 0.0.0.1 to 223.255.255.255, with the exception of the
loopback range of 127.0.0.0 to 127.255.255.255.
•
Error: Primary and Backup settings are the same
: you entered the exact same
configuration settings for the primary and backup address/port. They must have at least
one difference.
Summary of Contents for BBG-1090-TRX-MPEG
Page 18: ...18...
