59
Source Selection
The Source Selection area is available in the Connections tab, as well as in the Transcoder, ASI
Outputs and IP Outputs tabs. This allows a connection to a given output to be established as part
of the configuration actions for the output. The operation is the same regardless of the location
of the control.
The Source Port Selection is a three-step process:
•
Step 1: Select the port type in the Source Port drop-down list. The options are:
o
Ethernet 1: UDP/IP Input streams from Ethernet Port 1.
o
Ethernet 2: UDP/IP Input streams from Ethernet Port 2.
o
Transcoder: Transcoded programs.
o
ASI Input: Streams from one of the two ASI Inputs.
o
TPG: Test Packet Generator (internal test streams). TPG configuration is
discussed in the Admin Test Packet Generator Tab section.
•
Step 2: Select the individual stream in the Source Stream drop-down list. The names
presented here are the Stream Names configured when the ports were created. If no
streams were configured in that port, no options will be presented. This process is
illustrated below.
Summary of Contents for BBG-1090-TRX-MPEG
Page 18: ...18...
