manualshive.com logo in svg

Coastcom D/I Mux III System, User Manual

Share
Download
Coastcom D/I Mux III System User Manual Download Page 6

D/I MUX III User’s Manual 

iv 

Product Description 

Coastcom's D/I Mux III

™

 is an intelligent drop-and-insert T1 multiplexer for voice, data, and 

special service applications.  It offers programmable software for monitoring and controlling 
configurations, transmissions, alarms, and diagnostics.  Intelligent channel cards permit 
software access to individual circuits. 

D/I Mux III accesses one or two T1 transmission lines, and interfaces up to 48 DS0 transmission 
channels.  Voice, data, video, and special services are provided in any combination within a D/I 
Mux III.  With the addition of Coastcom's 5-port Subrate Data Multiplexer (SDM) line cards, up to 
120 data circuits are supported in a single multiplexer.  

Special features of the D/I Mux III are its network compatibility, remote control capability, 
integral T1 channel service unit, and standard copper wire Line Interface Units (LIU). Also,   AC 
power supply with ringer, redundant DC power supply option, and Automatic Loop Protection 
Switching (ALPS

™

) as an optional feature for data protection in the event of transmission 

failure.  There are also several unique channel cards that offer services such as high quality 
audio, links to other T1 systems, and on-line selectable high speed data.  

 

All equipment specifications subject to change without notice.

Summary of Contents for D/I Mux III System










































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands