21
OWNER’S MANUAL
2020
ROTATE VIEW -
Rotate the view 180 degrees. The UP and DOWN buttons also swap when rotated. With ROTATE VIEW
highlighted, press MENU to enter ROTATE VIEW setting. Use UP/DOWN to select desired setting and RETURN to confirm the
setting and exit.
SPECIAL TEMP -
To temporarily heat spa to 105°F or 106°F once, and return to previous temperature setting. With SPE-
CIAL TEMP highlighted, press MENU to enter SPECIAL TEMP setting. Use UP/DOWN to select the desired setting and RETURN
to confirm the setting and exit.
HEAT MODE -
select STANDARD heating mode (polls every Energy Interval) for most users or ENERGY SAVING mode
(polls every other Energy Interval) or VACATION mode (set temp set to 60°F). With HEAT MODE highlighted, press MENU to en-
ter setting. Use UP/ DOWN to select the desired setting and RETURN to confirm the setting and exit.
FILTER CYCLES -
set up filter cycle START TIME, DURATION, and DAY for filtering the spa. For FILTER CYCLE 1 and 2, if
DURATION is set to ZERO the system will do a purge cycle at the start time setting. With FILTER CYCLE highlighted, press
MENU to enter. Select a FILTER CYCLE and press MENU again to enter the TIME/DURATION setting screen. In this screen,
press MENU to move between HOURS, MINUTES and DAYS; use UP/DOWN to change the values and RETURN to exit and con-
firm the setting. FILTER CYCLES 3 & 4 by default are OFF. To set them, enter START TIME, DURATION and enable ALL DAYS
or a specific day.
1. To program the SWIM WORKOUT; press the MENU button; then UP button and select SWIM
WORKOUT
by pressing the
MENU
button to get to the
WARM UP
setting.
2. Press the
UP
or
DOWN
button to select the
SPEED #
for
WARM UP
; then press the
MENU
button to select
DURATION
in
minutes; then press the
MENU
button twice to get to
WORKOUT
.
3. Press the
UP
or
DOWN
button to select the
SPEED #
for
WORKOUT
; then press the
MENU
button to select
DURATION
in
minutes; then press the
MENU
button twice to get to
COOL DOWN.
4. Press the
UP
or
DOWN
button to select the
SPEED #
for
COOL DOWN;
then press the
MENU
button to select
DURATION
in
minutes; then press the
RETURN
button twice to get out of
SWIM WORKOUT.
5. Press the
SWIM WORKOUT
button to turn
ON
the pump – the red
SWIM
icon on the
LCD
screen turns
ON.
The
WORKOUT
feature will activate to cycle each of the
SPEED
setting and specific
DURATION
setting for
WORKOUT
. If you need to increase
or decrease the pump speed manually; then press the
UP
or
DOWN
button to your desired
SPEED #
in each cycle.
6. Press the
SWIM WORKOUT
button again to turn OFF the pump – the red
SWIM
icon on the LCD screen turns OFF.
Swim Workout Programming
SELECTION ICONS
SWIM SPA & SWIM WORKOUT
1.Press the SWIM button to turn the pump ON – the SWIM icon on the LCD screen turns ON.
2.Then press UP or DOWN button to select your desired SPEED #.
3.Press the SWIM button again to turn OFF the pump the blue SWIM icon on the LCD screen turns OFF.
Settings Explained
Summary of Contents for Swim 2100VE
