17
OWNER’S MANUAL
2020
ROTATE VIEW -
Rotate the view 180 degrees. The UP and DOWN buttons also swap when rotated. With ROTATE VIEW high-
lighted, press MENU to enter ROTATE VIEW setting. Use UP/DOWN to select desired setting and RETURN to confirm the setting
and exit.
SPECIAL TEMP -
To temporarily heat spa to 105°F or 106°F once, and return to previous temperature setting. With SPECIAL
TEMP highlighted, press MENU to enter SPECIAL TEMP setting. Use UP/DOWN to select the desired setting and RETURN to con-
firm the setting and exit.
HEAT MODE -
select STANDARD heating mode (polls every Energy Interval) for most users or ENERGY SAVING mode
(polls every other Energy Interval) or VACATION mode (set temp set to 60°F). With HEAT MODE highlighted, press MENU to enter
setting. Use UP/ DOWN to select the desired setting and RETURN to confirm the setting and exit.
FILTER CYCLES -
set up filter cycle START TIME, DURATION, and DAY for filtering the spa. For FILTER CYCLE 1 and 2, if
DURATION is set to ZERO the system will do a purge cycle at the start time setting. With FILTER CYCLE highlighted, press MENU
to enter. Select a FILTER CYCLE and press MENU again to enter the TIME/DURATION setting screen. In this screen, press MENU
to move between HOURS, MINUTES and DAYS; use UP/DOWN to change the values and RETURN to exit and confirm the setting.
FILTER CYCLES 3 & 4 by default are OFF. To set them, enter START TIME, DURATION and enable ALL DAYS or a specific day.
DATE-TIME -
set up Date and Time for the spa. With DATE-TIME highlighted, press MENU to enter the DATE-TIME setting. In
this screen, pressing MENU will move and highlight various fields that can change the setting; UP/DOWN to change the values and
RETURN to confirm the setting and exit.
DEGREE F/C
-
displays spa temperature in Celsius or Fahrenheit. This option is only available for 60 Hz countries. Unit automatically
displays Celsius for 50 Hz. With DEGREE F/C highlighted, press MENU to enter the DEGREE F/C setting. Use UP/ DOWN to select
the desired setting and RETURN to confirm the setting and exit.
TIME DISPLAY -
displays spa time in AM/PM or 24 hour time. With TIME DISPLAY highlighted, press MENU to enter TIME
DISPLAY setting. Use UP/DOWN to select the desired setting and RETURN to confirm the setting and exit.
GENERAL INFORMATION -
Displays general information for the spa. With GENERAL INFORMATION highlighted, press
MENU to enter the GENERAL INFORMATION menu. Use UP/DOWN to view different pages and information, press RETURN to exit
the page.
LANGUAGES -
To select various languages for the spa display. With LANGUAGES highlighted, press MENU to enter and
select a specific language. Use UP/DOWN to select the desired setting and RETURN to confirm the setting and exit.
DEVICES TIMEOUT -
allows changes to timeout setting for various devices. LIGHT can be set to a maximum of 4 hours;
PUMP in high speed and BLOWER can be set to a maximum of 1 hour; and PUMP in low speed can be set to a maximum of 2
hours. With DEVICES TIMEOUT highlighted, press MENU to enter and select various devices setting. Use UP/DOWN to select the
desired time setting and RETURN to confirm the setting and exit.
Settings Explained
Summary of Contents for Swim 2100VE
