18
OWNER’S MANUAL
2020
PANEL LOCK -
provides a choice to select PANEL for locking all panel buttons except MENU button; use TEMP to lock UP/
DOWN button for changing set temperature; and MENU to lock MENU button (push and hold MENU button more than 15 seconds to
unlock the Menu). With PANEL LOCK highlighted, press MENU to enter PANEL setting. Use UP/DOWN to select the desired setting
and RETURN to confirm the setting and exit.
NO HEAT TIME -
set the time frame for not allowing the heater to turn on. With NO HEAT TIME highlighted, press MENU to
enter the NO HEAT TIME setting. In this screen, pressing MENU will move and highlight various fields that can change the setting;
use UP/DOWN to change the values and RETURN to confirm the setting and exit.
SERVICE MODE -
only available for Authorized Dealers and Spa Manufacturer.
DEMO MODE -
To demonstrate all device capabilities of the spa. With DEMO MODE highlighted, press MENU to enter DEMO
MODE setting. Use UP/DOWN to select the desired setting and RETURN to confirm the setting and exit.
SERENITY MODE -
Set to turn off all outputs and provide quiet while in the spa. With SERENITY MODE highlighted, press
MENU to enter and select a specific time. Use UP/DOWN to select the desired time setting. Press MENU again to navigate to EXIT/
START. Select the desired option and RETURN to confirm the setting and exit.
ENERGY INTERVAL -
Only available for Non-Circ systems. With ENERGY INTERVAL highlighted, press MENU to enter the EN-
ERGY INTERVAL setting. Use UP/DOWN to select the desired minutes (15-240) and RETURN to confirm the setting and exit.
SILENT TIME (FUNCTIONS PAUSE) -
Only available for Non-Circ systems. Set the time frame for no polling during night or other
desired periods. With SILENT TIME highlighted, press MENU to enter the SILENT TIME setting. In this screen, pressing MENU will
move and highlight various fields that can change the setting; use UP/DOWN to change the values and RETURN to confirm the set-
ting and exit.
CLEANER CYCLE -
Only available for Non-Circ systems. To turn on filtration after using the spa for short cleaning period. With
CLEANER CYCLE highlighted, press MENU to enter and select a specific duration. Use UP/DOWN to select the desired time
setting. Press Menu again to navigate to Exit/Start. Select the desired option and RETURN to confirm the setting and exit.
Settings Explained
2100 5 Pump Topside Quick Reference Card
Summary of Contents for Swim 2100VE
