CNET ColorNet ecopy, Operating Instructions Manual

Page: 79 / 222

Registering Scan Settings
71
3
❖
❖ ❖
❖
Scan Size
This item lets you select the size of
the area to be scanned. You can se-
lect from the following options.
Auto Detect, A3
S
, A4
S
, A4
R
,
A5
S
, A5
R
, 11x17
S
, 8
1
/
2
x14
S
,
8
1
/
2
x 1 3
S
, 8
1
/
2
x 1 1
R S
,
8
1
/
2
x 1 1
S
, 5
1
/
2
x 8
1
/
2
R
,
5
1
/
2
x8
1
/
2
S
, B4JIS (Japanese In-
dustrial Standard)
S
, B5JIS
S
,
B5JIS
R
, Custom Area Setting
Note
❒
Original sizes that can be auto-
detected vary depending on
where you place the originals
(on the exposure glass or on the
ADF). See
⇒
p.110 “The Origi-
nal Sizes Available for Auto De-
tection” for details.
❒
When
[ Custom Area Setting ]
is se-
lected, specify the scanning area
for
[ Start Positn. ] and [ Scanning
Area ] .
❖
❖ ❖
❖
Position
Specify the position where scan-
ning starts when
[ Custom Area Set-
ting ]
is selected in the
[ Scan Size ]
list.
Enter the offset from the reference
(start) point in millimeters or inch-
es.
Note
❒
This setting is enabled only
when
[ Custom Area Setting ] is se-
lected in the [ Scan Size ] list.
❒
You can select millimeters or
inches to specify the position
using
[ Unit of Measure ]
in
[ 2.Send-
Scan Settings ] under the Scanner
Features menu. See
⇒
p.61
“Unit of Measure” for details.
❖
❖ ❖
❖
Scanning Area
Specify the position where scan-
ning ends when
[ Custom Area Set-
ting ] is selected in the [ Scan Size ]
list.
Enter the offset from the position
specified for
[ Start Positn. ] , in mil-
limeters or inches.
Note
❒
This setting is enabled only
when
[ Custom Area Setting ] is se-
lected in the [ Scan Size ] list.
❒
You can select millimeters or
inches to specify the position
using
[ Unit of Measure ] in [ 2.Send-
Scan Settings ]
under the Scanner
Features menu. See p.61 “Unit
of Measure” for details.
❒
Make sure that you specify ver-
tical/horizontal positions and
scanning areas to be within the
available scan area. The availa-
ble scan area varies depending
on where you place the origi-
nals (on the exposure glass or
on the ADF).
www.cnet.ie