CNET ColorNet ecopy Operating Instructions Manual Download Page 10

Page: 10 / 222

Safety Information

When using this machine, the following safety precautions should always be fol-
lowed.

Safety During Operation

In this manual, the following important symbols are used:

WARNING:

CAUTION:

WARNING:

Indicates a potentially hazardous situation which, if instructions
are not followed, could result in death or serious injury.

CAUTION:

Indicates a potentially hazardous situation which, if instructions are not
followed, may result in minor or moderate injury or damage to property.

• Connect the Power Cord directly into a wall outlet and never use an extension cord.

• Disconnect the power plug (by pulling the plug, not the cable) if the power cable or plug

becomes frayed or otherwise damaged.

• Turn off the power and disconnect the power plug (by pulling the plug, not the cable) if any

of the following conditions exists:

• You spill something into the equipment.

• You suspect that your equipment needs service or repair.

• Your equipment's cover has been damaged.

• Disposal can take place at our authorized dealer or at appropriate collection sites.

• Protect the equipment from dampness or wet weather, such as rain, snow, and so on.

• Unplug the Power Cord from the wall outlet before you move the equipment.

While moving the equipment, you should take care that the Power Cord will not be dam-
aged under the equipment.

• When you disconnect the power plug from the wall outlet, always pull the plug (not the ca-

ble).

• Do not allow paper clips, staples, or other small metallic objects to fall inside the equipment.

• For environmental reasons, do not dispose of the equipment or expended supply waste at

household waste collection points. Disposal can take place at an authorized dealer or at ap-
propriate collection sites.

• The inside of the machine could be very hot. Do not touch the parts with a label indicating

the "hot surface". Otherwise it could cause a personal burn.

• Our products are engineered to meet high standards of quality and functionality, and we

recommend that you only use the expendable supplies available at an authorized dealer.

www.cnet.ie

Summary of Contents for ColorNet ecopy































































































































































































































Search results

Summary of Contents for ColorNet ecopy

Reviews:

Related manuals for ColorNet ecopy

Brands by name

Popular brands

CNET ColorNet ecopy, Operating Instructions Manual

Search results

Summary of Contents for ColorNet ecopy

Reviews:

Related manuals for ColorNet ecopy

Brands by name

Popular brands