Setup using the Windows Wizard
Initial setup should be performed using the supplied Windows-based setup Wizard. This
program can locate the Network Camera even if its IP address is invalid for your network. You
can then configure the Network Camera with appropriate TCP/IP settings for your LAN.
Subsequent administration can be performed with your Web browser, as explained in
Chapter
5 - Web-based Management
.
Setup Procedure
1. Insert the supplied CD-ROM into your drive. If the setup program does not start
automatically, run
NeutralCamera.exe
in the root folder.
•
You will see the
Welcome
screen shown below.
•
Click the
Setup Camera
button to start the setup Wizard
Figure 2: Welcome Screen
2. The next screen, shown below, will list all the Network Cameras on your LAN.
Figure 3: Camera List Screen
8
Summary of Contents for CIC-930W
Page 1: ...CNet CIC 930W User s Guide...
Page 85: ...END OF TERMS AND CONDITIONS 82...
