Figure 4.5.2
Please bear in mind that depending on the manufacturer or model, the names of the terminals
on the frequency inverter can differ.
Be sure to consult your frequency inverter's documentation before taking the example shown
in Figure 4.5.2.
We do not guarantee that your frequency inverter is compatible with the control card.
You may need to set the jumper on the frequency inverter.
Allow the frequency inverter to be connected by a skilled electrician, working on AC power
are life-threatening!
4.6
Sensor input (SE) and length sensor/touch plate
Figure 4.6.1
Through the execution of our control card it is possible to operate a tool length sensor, touch
plate or a touch pen parallel.
In the Estlcam Software:
Open „Setup->CNC Controller->(Tap) Inputs“.
Figure 4.6.2
