2.1
Scope of delivery and required tool
2.1.1 Scope of delivery:
● 5 pieces o
ptocoupler with 4 connections
● 1 p
iece
o
ptocoupler
16 connections
● 1 p
iece
DC-DC Converter, set to +5V
● 1 p
iece Precision Potentiometers
● 2 p
ieces 15-pin female socket
● 4 p
ieces o
ne pole pin bar (
Possibly pre-assembled
)
● 1 p
iece of
LED ø3mm
● 12 p
ieces screw terminals, dual pole
● 2
pieces Screw Terminals, three pole
● 1 p
iece Capacitor
● 1 p
iece 5V
Arduino Nano V 3
● 1 p
iece professional produced PCB with pre-installed SMD components
2.1.2
Required Tools
:
● Soldering iron (30 watts)
● Soldering Tin ø0.5mm (e.g. Pb38Sn60Cu2) or equivalent.
● Side- or flat Cutter
● Well would also be a breadboard
2.2
Assembly of components
All parts are marked on the top of the board.
Now proceed as follows:
1.
Insert the two 15-pin socket on the Arduino nano
Figure 2.2.1