Now you should measure a current pass.
For problems, proceed as described in "Test the outputs (A1, A2)".
Setting and testing from output 0-10v:
In the Estlcam Software:
Open „View->CNC Controller (F2)“. (See figure 3.5.9)
Set the speed to the upper speed limit of your milling spindle e.g. 24000 rpm.
Figure 3.5.9
Place a voltage meter at the output "0-10v".
Figure 3.5.10
In the control, press the "play", the spindle is now turned on and the symbol now
appears in red. (See figure 3.5.6)
