If you want to use the sensor input, set it to active, inverted as shown in Figure 4.6.2.
The following schematic shows the operation of a touch plate and a tool length sensor in
parallel operation.
Figure 4.6.3
As soon as the tool touches the tool length sensor or the touch plate, the
The sensor input (SE) is switched on.
If you connect a line to the housing of your milling spindle, it is important that the
A continuous contact to the tool.
If the housing of your milling spindle is made of plastic, you can attach the pipe to the tool with
the help of a crocodile clamp.
