Operating instructions
T-Rex N-Serie (Stepper)
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 82
Support: +49 (0)2831/91021-50
07.03.2022
HINT:
Property damage due to improper transport!
In case of improper transport, transport pieces can fall or overturn. As a result,
property damage can occur in a considerable amount.
•
When unloading the transport items on delivery as well as during
internal transport, proceed cautiously and observe the symbols and
instructions on the packaging.
•
Use only the intended anchor points.
•
Remove packaging only shortly before assembly.
1 0 . 2
I n s p e c t i o n f o r T r a n s p o r t
Check the delivery immediately upon receipt for completeness and transport damage.
In the event of externally recognizable transport damage, proceed as follows:
•
Do not accept delivery or only with reservation.
•
Note the extent of damage on the transport documents or on the carrier's delivery
note.
•
Initiate a complaint.
HINT:
Complain about any defect as soon as it is detected. Claims for damages can only be
asserted within the applicable complaint periods.
1 0 . 3
P a c k a g i n g
To the packaging
The individual packages are packed according to the expected transport conditions. Only
environmentally friendly materials were used for the packaging.
The packaging is intended to protect the individual components from transport damage,
corrosion, and other damage until assembly. Therefore, do not destroy the packaging and
remove it only shortly before assembly.
Handling of packaging materials
Dispose of packaging material in accordance with the applicable legal provisions and local
regulations.
