Operating instructions
T-Rex N-Serie (Stepper)
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 11
Support: +49 (0)2831/91021-50
07.03.2022
Stored charge
DANGER:
Danger to life due to stored charges!
Electrical charges can be stored in electronic components, which are
retained even after switching off and disconnecting from the power supply.
Contact with these components can lead to serious to fatal injuries.
•
Before working on the components mentioned, completely disconnect
them from the power supply. Allow 10 minutes to ensure that the
internal capacitors are completely discharged.
2 . 2 . 2
Dangers from me chanics
Rotating tools
WARNING:
Risk of injury due to rotating tools!
Clamped tools for example a milling spindle can lead to serious personal
injury or property damage.
•
Before starting work, ensure that all covers, and safety devices are
installed and functioning properly.
•
Do not reach into moving tools during operation.
•
Before replacing the tools, always unplug the milling motor or switch
off the machine and secure it against reactivation.
Axis movement
WARNING:
Risk of injury due to axis movements!
Collision of persons with components of the machine (Y-bridge, mobile unit,
rotary table with workpiece, tool) can lead to the most serious injuries.
•
Do not hold body parts between the moving components and end
stops of the axles.
•
Do not reach into a gap between the recirculating ball screw and
adjacent components.
•
Do not reach into a column between the mobile unit and the Y-bridge.
•
Carry out work on the machine only at a standstill.
•
Wear personal protective equipment when working with the machine.
