Operating instructions
T-Rex N-Serie (Stepper)
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 44
Support: +49 (0)2831/91021-50
07.03.2022
4 . 4 . 1
Ma chine Control
On the right side you will find the main control board and the stepper motor power amplifiers for
the X, Y, Z and C axes. The controller is thus already prepared for the operation of a 4th axis, such
as a rotary axis or an oscillating knife (cutting module).
1 - Main Control Board
2 - Stepper motor power amplifier 4. Axis
3 - Stepper motor power amplifiers X1/X2/Y/Z channel
Here is the main power supply and the converter for the operation of the HF spindle.
1 - Inverter for HF spindle
2 - Power supply 24V motherboard etc.
3 - Transformer for stepper motor power amplifiers
Fig.10.1: Control
Fig.10.2: Control
2
3
1
2
3
1
