Operating instructions
T-Rex N-Serie (Stepper)
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 81
Support: +49 (0)2831/91021-50
07.03.2022
1 0
Transport, packaging and storage
HINT:
As part of the installation and further use, operators or maintenance personnel of the
operator must be entrusted with the handling of packages. In doing so, it is essential
to observe the following information.
1 0 . 1
S a f e t y i n s t r u c t i o n s f o r t r a n s p o r t
Floating loads
WARNING:
Danger to life due to floating loads!
During lifting operations, loads can swing out and fall down. This can cause
serious injuries up to death.
•
Never step under or into the swivel range of suspended loads.
•
Move loads only under supervision.
•
Use only approved hoists and slings with sufficient load capacity.
•
Do not use torn or scrubbed hoists such as ropes and straps.
•
Do not attach hoists such as ropes and straps to sharp edges and
corners, knot and do not twist.
•
Place the load when leaving the workplace.
Off-center focus
WARNING:
Risk of injury due to falling or tilting packages!
Packages may have an off-center center of gravity. If the stop is wrong, the
package may tilt and fall. Falling or tilting packages can cause serious
injuries.
•
Observe markings and information on the focus on the packages.
•
When transported by crane, hit the crane hook so that it is above the
centre of gravity of the package.
•
Carefully lift the package and see if it tilts. If necessary, change the
stop.
Improper transport