EN
5
• The equipment should not be used adjacent to or stacked with other
equipment and, if adjacent or stacked use is necessary, the equipment
should be observed to verify normal operation in the configuration in
which it will be used .
• Do not use the OL1000 or OL1000 SC while smoking or near heat, fire or
flammable gases because the device may be damaged .
• Do not use the OL1000 or OL1000 SC if there are exposed wires or the
device appears damaged .
• Do not modify or repair this device because you may damage it .
• Do not put the device or any of its parts in any liquid .
• Do not drop the device or bend the coils because this may damage it .
• Device is designed to comply with electromagnetic safety standards .
However, there is no guarantee that interference will not occur in a
particular installation . Harmful interference to other devices can be
determined by turning this equipment on and off . Try to correct the
interference using one or more of the following:
– Reorient or relocate the receiving device
– Increase the separation between the equipment
– Contact DJO Customer Care .
• Some people, with very sensitive skin, may experience redness .
Generally, this redness is totally harmless and usually disappears
after 10 to 20 minutes . However, never start another treatment on
the same area if the redness is still visible .
• If the performance of the device varies in any way from the described
operation, call Customer Care .
• The use of other cables and accessories may affect EMC performance .
• This device and its accessories must be kept out of the reach of children,
Pets, and Pests .
• Do not use device in contact with open wounds .
• Contamination by Patient could be sweat, expired gases, saliva, on the
Spinal Logic . Clean the applied part of the coil once a week using soap
and a damp cloth .
• Do not use device while in bath or shower .
Cautions
• DO NOT operate this unit in an environment where other devices are
being used that intentionally radiates electromagnetic energy in an
unshielded manner . Portable and mobile RF communications equipment
can affect Medical Electrical Equipment
.
