CME BodyGuard 121 Twins, Operator'S Manual, Page: 40 / 81

4-Operation
– Intermittent Infusion
40
2.
Press . Wait for the Volume screen to display.

NOTE:
If pump is not already in TPN Program refer to changing program section for
instructions.

NOTE:
Whenever you decide to set a new program, follow instructions at the bottom of each
screen.
3. If the previous program was not completed, the pump
disaplys the following screen:
4. Do one of the following:

To resume this program, press . The accumulation screen dispalys. The Volume
remaining will be infused.

To restart the program and /or set new parameters press and continue as follows:
5. Pump displays the last set volume (volume for the TPN
bag). Do one of the following:

Press to confirm the existing parameters.

Enter the desired volume using the numeric keypad and
press .

NOTE:
The screen will be blank upon initial setup.
6. The screen displays the last set time (total time for the
program to run). Press to confirm the existing
parameters or enter the desired time using the numeric keys
and press .

NOTE:
First two digits represent hours and last two digits represent minutes in the format
HH:MM (for example, enter 0-2-0-0 for 2 hr.). Use digital point to move from hours to minutes.
7. The screen displays the time for rate to taper up. Press
to confirm the existing parameters or enter the
desired value (up to 4:15 h) and press .
Channel 1
TPN PROGRAM
Total volume
__ml
Resume Press OK
Repeat Press NO
Volume 1500 ml
Press OK key
Total Time 12:30
Press OK key
Up Time 01:00
Press OK key