MAN.234 Rev.3 ENG - Use and maintenance manual S19HD (PRO)
page
64
of
83
(hydraulic tank capacity: 25 l)
Grease:
•
for arm extension and outriggers:
Interflon Grease LS1/2
Composition: mixture of mineral oils, calcium-lithium complex
thickener, additives and Teflon®.
(working field: from -20°C to +120°C)
•
for lubricators and bearing:
WHITE STAR NLGI 0 E 2
Composition:
mixture of mineral oils and additives.
(working field: from -30°C to +110°C)
•
for chains:
Interflon LUBE EP+
Composition: mixture of mineral and vegetable oils, additives and
Teflon®.
Density, 20°C: 0,89 g/cm3
Kinematic viscosity, 20°C (ASTM D2983): 380 mPa.
Before oil replacement, place an oil drip tray in order to avoid
the leakage of oil in the environment.
Do not disperse the exhausted oil or other consumables in the
environment; put them in the appropriate containers and give
them to the authorized collection centers.
8.14
Indications for the dismantling of the
MEWP
In the case of demolition, the machine is
completely dismantled according to the
regulations in force.
The different types of materials should be distributed to the re-
spective authorized collection centres.
The following material must be subjected to differentiated disposal
and then positioned in suitable premises and containers:
Ferrous materials
: carpentries and mechanical components.
Plastic materials
: gaskets, belts, protections.
Electrical materials
: windings, commands, solenoid valves and
similar.
Oils and lubricants
: hydraulic oil, reducers lubricants, lubricating
greases.
8.15
Service
www.
duma
-rent.com
