8 |
VinciLab User’s Guide
II.
G
ETTING STARTED
1. Turning VinciLab On and Off
To turn VinciLab On
•
Press the Power Button once.
•
While VinciLab is booting the
message ‘
VinciLab is starting. Please
wait.’
is displayed.
•
Wait until the device finishes its
booting procedure and displays its
starting Home Screen as shown on
the image.
Note:
•
The minimum battery level to start VinciLab is
1%
.
To turn VinciLab Off
•
Tap
Shut Down
in the status bar.
•
On the new screen tap:
Shut Down
to shut down VinciLab.
Reboot
to restart VinciLab.
Screen Off
to turn the screen off.
Pressing the Power button turns the screen on again.
Cancel
to cancel the operation and return to the Home Screen.
Note:
•
Holding the Power button for about 8 seconds causes VinciLab to shut down. Use this
possibility only in case of emergency when your VinciLab does not respond anymore.
2. Powering VinciLab
An internal rechargeable battery (Li-Poly 3.7 V, 4000 mAh, located in the back
compartment), powers VinciLab. The battery icon on the status bar of the Home Screen
indicates the current power level.
VinciLab is delivered with its battery partially charged. The device will work as long as
the battery provides power or it is powered via the power adapter. Before the battery
becomes too low for operating the device a warning will appear on the screen. If you
continue working without charging, the device will shut down. A fully discharged battery
requires up to 8 hours of charge time.
