VinciLab User’s Guide
| 25
2.
When a sensor is not
identified then it has to be
manually selected from the
Sensor Library: go to
Sensors
Screen
, tap
and select
Sensor Settings
, tap the
sensor input tab to which the
sensor is connected, tap
Choose
(or
None)
and select the desired sensor from the list.
or
•
Open a ready-to-go Coach Activity or Result:
-
Tap
or Tap
and select
Open
or
Open CMA Project…
.
-
Browse to select the desired Activity/Result or tap
and select the desired
Activity/Result from the list. Tutorials and examples of Activities are available in
the CMA Projects.
-
Confirm with
.
-
The Activity/Result opens. Coach
automatically
detects
and
identifies
the
connected
sensor(s). If the identified sensor
is different from the sensor
defined in the Activity/Result
then the sensor listed on the Activity Screen is displayed in red. The sensor digital
display shows information about the sensor defined in the Activity (red) and the
sensor identified by VinciLab. Connect the defined sensor or change it into the
detected sensor by tapping
Exchange
. This feature is not available for sensors,
which cannot be identified.
•
Tap
to display live readings of the connected sensors. The live displayed data are
not stored in VinciLab’s memory.
•
You are ready to start a measurement. The measurement will be executed according
to the given measurement settings. Tap
Measurement Settings
to check these
settings, modify if needed. Note that the max. sampling frequency is 1 MHz and the
max. number of collected measurement points is 50 000 per input.
•
Tap
to start data collection.
-
In most cases, Coach directly starts the measurement.
-
If triggering is enabled then the measurement is started automatically when the
trigger conditions are met.
-
When the type of measurement is set to
Manual
then the
Manual Start
icon
appears in the bottom bar. Tap this icon to collect a single measurement. When
keyboard input is specified then the value of one or more quantities has to be
typed in the dialog, which will pop-up.
