CMA Dishmachines H-1X, Installation & Operation Manual

Page: 10 / 36

4
DRAIN CONNECTION
(continued)
Installation
DO NOT
• Do not remove the clamps holding the drain hose to the back of the machine.
• Do not connect the dishwasher to a disposer.
• Do not reduce the size of the drain hose connection or use a domestic drain fitting.
• Do not add additional length to the drain hose.
• Do not allow the drain hose to kink.
! ATTENTION !
Failure to follow the drain connection instructions may void the warranty.
1. Machine is equipped with a 6ft. [2m] 5/8" I.D. drain hose. The maximum drain height
connection must not exceed 3ft. [1m] and must be vented to prevent wash tank siphoning.
2. Drain hose is located at the rear of the machine and is secured by two clamps to maintain
the anti-siphoning loop in the drain hose.
3. A 3/4" hose barb fitting is strapped to the drain. The Hose Barb Fitting is P/N 0512321.
4. Additional parts are supplied by others.
5. The maximum drain flow is 15 US gpm/12.4 imp gpm, /60 lpm.
Fig. 2
3/4” drain hose barb
fitting is strapped to
drain hose.