![background image](http://html1.mh-extra.com/html/club-car/ex40d/ex40d_service-repair-and-rebuild-manual_2626731035.webp)
- 31 -
Fig .3-55
(23) MUFFLER
(1) Mount the muffler and the gasket on the
cylinder head.
NOTE : Be sure to remove any tape or cloth
used to cover the exhaust port
when the engine was disassembled .
M8 × 12 mm Bolt : 1 pc .
M8 Nut : 2 pcs .
MUFFLER SIDE
GASKET
(Attention to the direction of bulge forming)
Bulge forming
CYLINDER SIDE
Take utmost care not to cut your hand
with the muffler gasket
to MUFFLER
GASKET
(Attention to the
direction of bulge
forming)
Tightening torque
(Recommend)
18 .0 - 22 .0 N
・
m
(180 - 220 kgf
・
cm)
(13 .0 - 16 .2 ft
・
lb .)
(24) EXTERNAL INSPECTION
Reassembly is completed . Check that the wiring is correct and that there are no loose nuts and bolts or
any other faults visible on the outside of the engine .
(25) FILLING WITH ENGINE OIL
Use the automobile engine oil of API service class SE or higher grade .
The amount of oil, refer to the table below .
Model
EX40
Engine oil volume
(maximum)
1 .2L