- 18 -
CRANKSHAFT
WOODRUFF KEY
CRANKCASE
M6 x 16 BOLT and
WASHER : 2 pcs.
OIL SENSOR
M6 x 10 TAPPING BOLT : 1 pc.
WIRE CLAMP
STEP 20
STEP 19
Step
Parts to remove
Remarks and procedures
Fasteners
19
Crankshaft
(1) Remove the woodruff key (for the flywheel
magneto) .
(2) Remove the crankshaft from the crankcase
by tapping its magneto side end with a plastic
hammer, taking care not to damage the oil seal .
(See Fig . 3-23)
Plastic hammer
20
Oil sensor
(1) Remove the clamp .
(See Fig . 3-24)
(2) Remove the oil sensor from the crankcase .
M6 x 10mm : 1 pc .
M6 x 16mm : 2 pcs .
Fig .3-22
Fig .3-23
Fig .3-24
OIL SENSOR
WIRE CLAMP