- 30 -
(21) BAFFLE2, RECOIL BRACKET, BLOWER HOUSING, RECOIL STARTER and STOP SWITCH
(1) Mount the stop switch to the blower housing . (M4 × 12 mm screw and washer : 2 pcs .)
*
Tighten the wire 2 (ground) with the stop switch . (See Detail C)
(2) Mount the blower housing on the crankcase .
（
M6 × 16 mm bolt : 5 pcs .
）
*
Tighten the wire 2 (ground) with the blower housing . (See View D)
(22) WIRING
Refer to the wiring diagram (See page 48 and 49) for wiring details .
Fig .3-54
BLOWER HOUSING
M6 x 15 BOLT : 5 pcs.
