Cloos GLW 322, Operating Instructions And Spare Parts

Page: 30 / 39

GLW 322
Cod.006.0001.1861
01/09/2014 v2.0
ENGLISH
29/38
4.7 PARAMETERS SETTING: SPECIAL FUNCTIONS
S1 Press this button to scroll the list of settings to edit.
The acronym relative to the setting to be edited appears on the following displays: D1
The value relative to the selected setting appears on the following displays: D2
E1 Using the encoder, edit the value of the selected setting.
The value is saved automatically.
Press any key (except S1) to save the setting and quit the menu.
Tab. 12 - Special functions in MMA mode
ACRONYM PARAMETER MIN DEFAULT MAX
d.Ar. DYNAMIC ARC oFF oFF on
Tab. 13 - SPECIAL FUNCTIONS menu parameters: CONTINUOUS DC TIG mode, PULSED DC TIG mode, SYNERGIC DC TIG mode
ACRONYM PARAMETER MIN DEFAULT MAX
q.St. Q-START 0.1 s oFF 60.0 s
d.Ar. DYNAMIC ARC 1 oFF 50
M.tA. MULTI TACK 0.5 Hz oFF 6.0 Hz *1
Tab. 14 - Special functions in AC TIG and PULSED AC TIG modes
ACRONYM PARAMETER MIN DEFAULT MAX
M.AC. MIX AC 10 % oFF 80 %
E.Fu. FUSIONE EXTRA 0.0 % oFF 80 %
F.AC. AC INVERSION FREQUENCY 20 Hz 65 Hz 200 Hz
bAL AC BALANCE -10 0 +10
d.EL. AC TIG ELECTRODE DIAMETER 1,0 mm 2,4 mm 4,0 mm
*1: When this function is active welding is performed without the following parameters:
SLOPE UP - SLOPE DOWN - START CURRENT - FINAL CURRENT