Cloos GLW 322, Operating Instructions And Spare Parts

Page: 12 / 39

GLW 322
Cod.006.0001.1861
01/09/2014 v2.0
ENGLISH
11/38
CODE SYMBOL DESCRIPTION
L19 When this LED illuminates the following parameter can be set:
WELDING CURRENT
L20 When this LED illuminates the following parameter can be set:
SECOND CURRENT B-LEVEL
L21 When this LED illuminates the following parameter can be set:
BASE CURRENT
L22 When this LED illuminates the following parameter can be set:
PEAK TIME
L22+L23 When this LED illuminates the following parameter can be set:
PULSED CURRENT FREQUENCY
L23 When this LED illuminates the following parameter can be set:
BASE TIME
L24 When this LED illuminates the following parameter can be set:
DOWN SLOPE
L25 When this LED illuminates the following parameter can be set:
FINAL CURRENT
L26 When this LED illuminates the following parameter can be set:
POST-GAS
L27 Illumination shows that the following function has been activated:
HIGH FREQUENCY ARC STRIKE (HF)
L28 Illumination shows that the following function has been activated: 2 stroke procedure.
L29 Illumination shows that the following function has been activated: 4 stroke procedure.
L30
Illumination shows that the following function has been activated: 4 stroke B-level pro high frequency arc strike
(HF).
L31 Illumination shows that the following function has been activated: 2 stroke spot procedure.
L32 This LED illuminates to show that the following welding mode is selected:
MMA
L33 This LED illuminates to show that the following welding mode is selected:
TIG DC CONTINUOUS
L34 This LED illuminates to show that the following welding mode is selected:
PULSED DC TIG
L35
This LED illuminates to show that the following welding mode is selected:
SYNERGIC PULSED DC TIG
When this is on, it means that the synergic mode is active and that the operator can set just the welding current while
the other parameters are automatically regulated by the machine. The synergy is optimised by angle welding.
L36 This LED illuminates to show that the following welding mode is selected:
TIG AC CONTINUOUS
L37 This LED illuminates to show that the following welding mode is selected:
PULSED AC TIG
L38
MMA mode: Illumination shows that the following function has been activated: VRD (reduced output voltage).
The no-load voltage between the welding sockets is switched from U
0
to U
r
(see technical data).
L39 PULSED TIG DC mode: Illuminates to show a value in the following unit of measurement:
KILOHERTZ
L40 Illuminates to show that a previously saved JOB has been loaded.