Cloos GLC 353 MC3, Operating Instructions Manual

Page: 45 / 122

B-27
Programming
GLC 353/503/553 MC3
When all values have been
set, the operation panel
shows the following:
- Turn Potentiometer 1 and 2 at the
Wire drive unit to mid-position.
- Press the key Operating mode for
more than 1 second.
- The first program step to be made is
setting of
Gas preflow .
Actuate the keys Up
or Down until the required
value has been set.
- Press and release the key Operating mode .
The next program step
Wire Inching can be entered.
Actuate the keys Up
or Down until the required
value has been set.
For robotic operation:
The inching-in value is used as
set value, if the command "Wire
by hand" (currentless wire
advance) is given and an external
control voltage is not available.
4
2
4
2
P4 Programmieren eines Schweißprozessablaufs
5