19
Horizontal / Vertical mounting
Fig a shows a unit mounted horizontal using the supplied pair of metal brackets
(fixed using 6 x M4 x 12 countersunk screws) and is offset to the bezel using a
pulley. The Pulley is supplied and must be used if the unit is placed offset to the
bezel. The maximum distance that the unit can be mounted from the bezel / pulley is
(500mm). (19.68") which will allow approx 2 Metre (78.74") cable drop.
IMPORTANT: Make sure the microphone cable does not run up hill over the
pulley. The cable must be horizontal to the pulley. Failure to do so will cause
the slack detect safety device to operate.
Fig a
Fig b shows unit mounted vertical and inline with the bezel. The pulley is removed as its not
required.
Fig b
