7
Now carefully remove from the foam packing the IR sensor, pair of metal
fixing brackets with screws, remote control and 4 cable fixing kits and set
aside. Next remove the top bezel containing the pulley along with the
microphone and magnet assembly.
1. Remove the protective covering on the microphone and insert the
microphone through the lower ceiling bezel and then push fit the top part
of the bezel to the lower bezel making sure the magnet is inside the top
part of the bezel.
2. Carefully twist the bezel around until the pulley / cable is in alignment with
the cable exiting the CCRM 4000. Lift the cable over the top of the pulley.
Any kinks or bends in the cable can be straightened by gripping the
cable with your hands and passing it through a clean dry cloth a few
times.
