CLIVET CKN-XHE2i 10.1, Installation And Operating Manual, Page: 33 / 66

When ECO RUNNING is set to ON, the set point cannot be modified from the
HOME page; if the user attempts to modify it, the following page appears:
If YES is selected, the ECO RUNNING function is disabled; if NO is selected,
ECO RUNNING is still active .
MAIN PARAMETERS
Press ▲ ▼ to select the parameter.
Press ◄ ► to set the value.
Press OK to confirm the value or press BACK to cancel it and return to the
previous page.
If EnURCool = 0 and EnURHeat = 0 are set on the controller, SetUR is
disabled; SetUR and URin are displayed as "--".
If EnDiffMand = 0 is set on the controller, QSetMand is disabled; QSetMand
and QAir are displayed as "--".
If EnProbe = 0 is set on the controller, SetCO2 is disabled; SetCO2 and VOC
are displayed as "--".
If the sensor does not work, the current value is displayed as "--".
ALARM LOG
Press ▲ ▼ to select ERROR CODE.
The time of the error code is that at which the corresponding protection
device intervenes or the error occurs.
Press▲ ▼ to skip to the log pages.
Up to maximum 24 errors can be displayed (when 25 faults occur or
protection devices intervene, the error that occurs first will be cancelled)
Select an error code and press OK to access the page with the details.
If an error occurs, the same page appears
33