32
7. Appendix
7.1 SMS Remote Programming Commands Table
Item
Command
Example & Usage
Default
Cellular Module
Reset
RSTG
RSTG:PROG,1111
To reset Cellular Module
--
GPRS APN,
username &
password
APN
APN:PROG,1111,internet,,
To set GPRS APN, username and password (31 characters max. for APN, 31
characters max. for username, 31 characters max. for password)
APN:
Internet
Username
and
password:
empty
Report settings
RPT
RPT:PROG,1111,1,0933111222,1,0,0,1
To configure report settings (index number, report destination, group, type,
miscellaneous and event filter)
Report Index: 1-5
Report destination: Depending on the reporting format
Group: 1-5
Type: 0 = Speech, 10 = CID_IP, 11 = CID_SIA_IP, 12 = SIA_IP, 13 = SIA_CID_UDP, 14
= SIA_UDP, 18 = AG_XML, 20= CID_SIA2_IP, 21= SIA2_IP, 22= CID_SIA2_UDP, 23=
SIA2_UDP, 30 = SMS_CID, 31 = SMS_TEXT,
Miscellaneous: Enter 0 for this parameter
Event filter: 255 = all, 1 = status, 4 = emergency
No report
destination
Factory reset
FTSET
FTSET:PROG,1111
To execute a factory reset
-
To reboot
VCP-LTE
RESET
RESET:PROG,1111
To restart VCP-LTE.
--
Remote Firmware
Upgrade
FWUG
FWUG:PROG,1111,59.124.230.221,53033,/img/123.bin,042d
Upgrade VCP-LTE firmware by downloading firmware file from server remotely.
Parameter 1: Server IP Address (Max 44 characters)
Parameter 2: Server Port Number
Parameter 3: File path(max 31 characters)
Parameter 4: crc16 check sum
To check cellular
signal strength /
gsm IMEI / gsm
version / operator
imsi / network type
CSQ
CSQ:PROG,1111
--
Adjust Two-way
Volume and
Microphone
Sensitivity
SPKVL
SPKVL:PROG,1111,1, 2,2
Adjust Two-way volume and microphone sensitivity
Parameter 1: Enter 1 for this option.
Parameter 2: Two-way volume (Level 1-5)
Parameter 3: Microphone Sensitivity (Level 1-5)
1 = minimum
5 = maximum
--
Set Access code
ACCES
ACCES:PROG,1111,1,1234
To change the access code for programming and incoming call
Parameter 1: Enter 1 for this option
Parameter 2: Access Code (4-digit)
1111
To check
microphone/speak
er setting
MICSP?
MICSP?:PROG,1111
--
