23
4.1.6 Device
Click on the
“
Device
” tab for Device settings where you can view device zone, type, add
or remove devices.
For learning new device(s), please use local learning mode or use the PC Programming
Tool.
Add Sensor:
Depends on the supplier, a Sensor ID of the device may be labeled (usually on the back
of the device). Users can use the “Add Sensor” function to include sensors into the
VCP-LTE.
Click on the “
Add Sensor
” button:
Enter the Sensor ID (the barcode on the back of the sensor). A sensor ID is a
combination of digits 1-9 and characters A-F and can contain 10 or 14 characters
(can be uppercase or lowercase characters).
If the sensor is successfully added, the sensor will be assigned from Zone 1 to 20 in
sequence.
Removing sensors:
Click on the device entry you wish to delete from the Device List, and then click the
“
Delete Sensor
” button.
