Climax VCP-LTE, Installation Manual

Page: 31 / 37

29

During guard time, the user can cancel the alarm reporting by pressing the Alarm
Button of VCP-LTE for 5 seconds or pressing the Active Button of the learnt-in RF
device for a duration determined by the device (please refer to the device user
manual).

Alarm cannot be cancelled after guard time has expired.

If there are no report destinations programmed, VCP-LTE will not report after Guard
Time expires.
Guard Time Fall Sensor

When a fall is detected from the learnt-in Fall Sensor, VCP-LTE will enter guard
time fall sensor.

If a false alarm is triggered by Fall Detection, it can be canceled within the guard
time fall sensor period by pressing the Alarm Button of VCP-LTE for 5 seconds or
pressing the Active Button of the learnt-in RF device for a duration determined by
the device (please refer to the device user manual).

After the Guard Time Fall Sensor has expired, VCP-LTE will begin report, the alarm
event cannot be cancelled after Guard Time Fall Sensor has expired.

This function is only used when a fall is detected, if the Alarm Button on VCP-LTE or
the Active Button of the learnt-in Fall Sensor is pressed to activate alarm, normal
guard time is used instead.
Confirmation Beeps

After guard time expires, VCP-LTE will summon help based on the programmed
reporting methods. When VCP-LTE is reporting, it will emit confirmation beeps (1
beep every second).

For Speech Reporting, if the call recipient picks up the call, VCP-LTE will stop
beeping. It will start emitting confirmation beeps again when reporting is resumed
(e.g. report to the next report destination).
Silent Mode

When Mobile Silent function is enabled and VCP-LTE is under Silent Mode. It will
not emit confirmation beeps during alarm reporting under Silent Mode.
6.2.1 Callback Mode

After reporting an alarm successfully to the CMS, VCP-LTE will enter callback mode
by default.
<NOTE>

VCP-LTE will enter callback mode only after all groups have been reported to and
at least one report was successful.

When a caller calls back within the period, VCP-LTE will auto answer the call after 2