P/N 52815, Rev. 7
Page 77
6
STORAGE AND SHIPPING
IN THIS CHAPTER:
6.1 S
TORAGE
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -77
6.1.1 S
HORT
-
TERM
STORAGE
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -77
6.1.2 L
ONG
-
TERM
STORAGE
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -78
6.2 S
HIPPING
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -78
6.3 D
ECOMMISSIONING
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -78
6.1
S
TORAGE
Proper storage of the BW3000 AutoBoreWelder will extend its usefulness and pre-
vent undue damage.
Before storing, do the following:
1. Clean the machine with solvent to remove grease, metal chips, and mois-
ture.
2. Drain all liquids from the pneumatic conditioning unit.
Store the BW3000 AutoBoreWelder in its original shipping container. Keep all
packing materials for repackaging the machine.
6.1.1
Short-term storage
Do the following for short-term storage (three months or less):
1. Retract the tool head from the workpiece.
2. Remove the tooling.
3. Remove hoses.
4. Remove the machine from the workpiece.
5. Clean the machine to remove dirt, grease, metal chips, and moisture.
6. Spray all unpainted surfaces with WD-40 to prevent corrosion.
7. Store the BW3000 AutoBoreWelder in its original shipping box (Figure 6-
1 on page 78).
Summary of Contents for AUTOBOREWELDER BW3000
