Climax AUTOBOREWELDER BW3000, Operating Manual

Page: 28 / 150

Page 14 BW3000 Operating Manual
• Make minor adjustments in the rotational speed, voltage, and wire
speed to maintain good weld quality.
2.1.1 Features
Principle features include the following:
Patented “step” process
• Complete weld coverage at the start and finish of the bore.
• Infinite step size (and weld bead) adjustment from 0.025" (0.6 mm) to
0.220" (5.6 mm).
• Ability to step in either direction.
• Adjustable step location.
Auto Skip
• Ability to designate weld-only or skip-weld areas up to 180 degrees.
• Automatic skipping of keyways and intersecting bores.
• Automatic repair of out of round bores without pre-machining.
• Reduced repair, machining, and pre-machining time.
• Lower consumable and labor costs.
• Elimination of re-welding by skipping good sections of the bore.
Auto stop and position marker
• The Auto Stop function allows you to set a stop point so that the Bore-
Welder stops when the bore is complete.
• The Position Marker recalls the last stop point.
Control box
• When a CLIMAX wire feeder is used, the control box provides:
• One central location for adjusting all BW3000 functions.
• Remote control of the welding power supply.
Patented torch and extension system:
• Quick disconnect system with a captive liner allowing for fast setup
and takedown.
• Easy replacement of consumables without moving the BoreWelder.
• Quick readjustment for bores longer than the stroke of the machine.
• 175 ampere current limit
• Extended arc time for high productivity.
• Up to five lbs/hour of weld deposition