© 2003 directed electronics, inc.
37
6.
Feature change - Press the arm/disarm button on the transmitter. If the system
chirps once, the feature has just turned off; if the system chips twice, the feature
has just turned on. If the feature has more than two settings, continue pressing
the arm/disarm button on the transmitter to toggle through the settings.
To advance to the next feature in the same column, press
the same number
of times as the desired feature within 60 seconds; to change a feature in a
different column begin at step 4 by entering the column number first and then
the row number.
N
NO
OTTEE:: Refer to the Feature Descriptions sections of this guide for important notes and
descriptions of the system features and programming.
7.
Exit programming - To exit programming mode turn the ignition off or wait 60
seconds without pressing the PlainView 2 Valet switch. The siren will chirp three
times to indicate programming mode has been exited.
